Chemicals Horizontal Plate Filter / Rotary Pressure Filter Carbon Steel Vessel

Chemicals Horizontal Plate Filter / Rotary Pressure Filter Carbon Steel Vessel

Pressure Plate Filter Brief introduction

Thank you very much for choosing WYB series horizontal leaf filter manufactured by our company. This equipment is an efficient, energy saving solid-liquid separation equipment of enclosed operation type. It is widely employed in industries such as chemical engineering, petroleum, foodstuff and pharmaceutical, etc.

This product is of novel design, the main body of filter consists of filtration tank, screen, end-plate pullout device, automatic dreg discharging device, etc. During filtering, the filter aid is mixed up with material in the mixing cylinder then transmitted by pump onto the filter screen to form a filter cake layer. Once the stable filter cake is realized, the minute filter aid particles provide countless micro passages, which entrap the suspended impurity and let the clear liquid through. Therefore the real filtration is realized through the cake layer. In case that the filter cake over the surface of filter screen reaches certain thickness, or the filtration pressure is up to 0.4 MPa, the feeding shall be stopped, and compressed air or steam shall be employed to blow dry the cake, and clean the filter screen the discharge , the vibration dreg discharging device shall be switched on, the dregs shall be unloaded because of weight and vibration. As to sticky filter cake, manual help shall be provided to clean up the dregs.

This product realizes filter without the filter paper and cloth , and the filtration is enclosed prevent environmental pollution, the labor intensity is low thanks to automatic dreg removal.

Operation cautions

The locking device can only be released under pressure free and no material circumstance, then the screen can be pulled out to carry out dreg discharging.

This supplier is not obliged for any unfavorable consequences or serious accident due to reasons not attributable to the equipment such as over pressure filtration or breaching of protocol, etc.

List of consumable parts

Pressure Plate Filter competitive advantage:

1, Filtering gauze flakes can be pulled out automatically, and easy to be inspected and cleaned.

2, As the leaves filtering on both sides, large filtration area and solids holding capacity can be obtained.

3, Automatically residue discharging by which labor can be largely reduced.

4, Controlled by hydraulic thus automation is to be.

5, A large filtration area and large solids holding capacity can be obtained .

Therefore the real filtration is realized through the cake layer. In case that the filter cake over the surface of filter screen reaches certain thickness, the feeding shall be stopped, and compressed air or steam shall be employed to blow dry the cake,

and clean the filter screen the discharge , the vibration dreg discharging device shall be switched on, the dregs shall be unloaded because of weight and vibration. As to sticky filter cake, manual help shall be provided to clean up the dregs.

Pressure Plate Filter Application:

Syrups, edible oils, dewaxing , decolour, degrease

Chemical industries: Sulphur, aluminum sulfate, Polyaluminum chloride, plastic, dyestuff intermediate, bleaching liquid, lubricant additives and intermediate and high pressure polyethylene, etc.

Technonlgical Parameters: